Rake winch
Electric rake
Rake winch Rake winch Rake winch technical parameters
Rake winch is mainly used for ore handling and filling work in pits or open air in metal mines and other mines. . It is mainly used for horizontal rake transportation, and can also be used for rake transportation on slopes with small inclination angles. It cannot be used as lifting equipment. The driver can operate it by hand next to the winch, or use a button to perform distance control a few meters or even tens of meters away from the winch.
Structural composition of rake winch
The rake winch is mainly composed of reduction device, main drum, auxiliary drum, control device, steel rope guide device and electric motor. These components are installed inside and outside the shell respectively. The shell is a component with good rigidity, which not only protects and supports, but also bears all loads. It is bolted to two slides connected to the foundation. The double-drum winch has a main drum (mounted on the right side, that is, the side closest to the motor) and an auxiliary drum (mounted on the left side). The three-cylinder winch has one main drum (installed in the middle) and two auxiliary drums (installed on the left and right). The three-cylinder winch can also be equipped with two main drums (installed on the right and middle) and one auxiliary drum. drum (installed on the left side), each drum has a corresponding control device and a wire rope guide device.
Technical parameters of rake winch
Rake bucket volume
Average tension of working drum
Average speed of working steel rope/
Diameter of working steel rope
Working drum Rope capacity
Motor power
Motor speed
Weight (excluding rake and pulley)
Technical hotline Anhui
Address No. Kaiyuan Road, High-tech Zone, Jining City
30kw rake winch 2JP30 rake winch